coils and pods
Showing 1–24 of 34 results
-
Coils, coils and pods
Aspire BVC Replacement Coil
Available Coil Resistance:
- 1.6ohm
- 1.8ohm
- 2.1ohm
Compatible with:
- K1, K2, ET-S, CE5 and CE5-S tanks.
Important: When using the coil for the first time, make sure to let the e-liquid sit in the tank until the cotton is fully saturated before firing your device. This should take around 2-3 minutes according to e-liquid thickness. This will ensure your atomiser does not burn out.
SKU: n/a -
Coils, coils and pods
Aramax Coils 1.8omh
1.8ohm. Replacement coils for the ARAMAX Vape Pen.
You should replace your coils at least every two weeks if you use your electronic cigarette regularly. If there is a burnt taste or your liquids aren’t tasting as good then you need to replace the coil
SKU: n/a -
Coils, coils and pods, Pockex
Aspire PockeX Replacement Coil
Aspire PockeX:Â
The 0.6ohm 316L stainless steel coil is good for both flavour and vapour production, while the 1.2ohm Kanthal coil is a perfect choice if you prefer high nicotine e-liquid.
Resistance Options:
- 0.6Ω (coil pre-installed in PockeX device)
- 1.2Ω
Compatible with:
- Aspire PockeX
SKU: n/a -
Coils, coils and pods
Aspire Atlantis Evo Replacement Coil
Aspire Atlantis Evo Replacement Coil
Resistance Options:- 0.4Ω
- 0.5Ω
Important:
When using the atomiser for the first time, make sure to let the e-liquid sit in the tank until the cotton is fully saturated before firing your device. This should take around 2-3 minutes according to e-liquid thickness. This will ensure your atomiser does not burn out.
SKU: n/a -
Coils, coils and pods
Aspire Cleito 120 Pro Coil
Aspire Cleito 120 Pro Replacement Coil
Resistance Options:- 0.15Ω (Mesh)
Important:
When using the atomiser for the first time, make sure to let the e-liquid sit in the tank until the cotton is fully saturated before firing your device. This should take around 2-3 minutes according to e-liquid thickness. This will ensure your atomiser does not burn out.
SKU: n/a -
Coils, coils and pods
Aspire Cleito Pro Replacement Coil
Aspire Cleito Pro Replacement Coil
Resistance Options:- 0.15Ω (Mesh)
- 0.5Ω
Important:
When using the atomiser for the first time, make sure to let the e-liquid sit in the tank until the cotton is fully saturated before firing your device. This should take around 2-3 minutes according to e-liquid thickness. This will ensure your atomiser does not burn out.
SKU: n/a -
Coils, coils and pods
Aspire Tigon Replacement Coil
Aspire Tigon Replacement Coil Resistance:
- 0.4Ω (23-28W)
- 0.7Ω Mesh (20-25W)
- 1.2Ω (10-12W)
You can use all coil resistances for nicotine salt e-liquids.
To replace the coil on the Aspire Tigon tank: unscrew the base hardware. Then, pull out the old coil and replace it by pushing in a new one.
SKU: n/a -
coils and pods
Gotek Pod
This is the original Aspire Gotek Refillable Pod which is compatible with both the Aspire Gotek S, Gotel X, Gotek X II & Gotek Pro.
Please note the 0.6Ω Gotek Refillable Pod is not compatible with the Aspire Gotek S & Aspire Gotek X!
Contents
1 x Aspire Gotek Refillable Pod
SKU: n/a -
coils and pods, Pod System
Minican Plus Pod
The Aspire Minican+ replacement pods have been specifically made to be used with the Minican+ pod kit. All that’s needed when the 0.8 Ohm coil is ready to be changed, is for the pod to be replaced.
No messing around trying to change coils, saving you both time and hassle. It’s easily refilled with the rubber stopper on the bottom preventing unnecessary leakage, so you can be sure topping up your e-liquid will be a cleaner process.
As the coil has a resistance of 0.8 Ohm, it’s ideal for an MTL set up. To match this, we’d recommend an e-liquid that’s around 50% PG or higher, which will produce a more discreet amount of vapour.
Contents
1 x Aspire Minican Plus Pod
Features
MTL Vaping
Bottom Filling
Compatible With High PG E-Liquid
SKU: n/a -
Coils, coils and pods, OXVA
OXVA XLIM Pod replacement
The new replacement cartridges for the OXVA XLIM POD has arrived . Made of PCTG, it has a 2ml capacity. The Xlim V2 pods are highly leak resistant and side fillable, and the new 0.6 ohm pod works great with freebase. The new V2 is available in two variants: 0.6ohm and 0.8ohm.
SKU: n/a
