Aspire
Showing 1–24 of 37 results
-
Tanks
Aspire K2 tank
The K2 tank is a 510 fitted tank, suitable for 510 mods/batteries. The K2 tank is a bottom-filling tank, and has a removable drip tip mouthpiece, making cleaning and maintenance of the tank easier.
Aspire K2 Tank works best with:
- Aspire BVC 1.6ohm coil
Important:
When using the tank for the first time, make sure to let the e-liquid sit in the tank until the cotton is fully saturated before firing your device. This should take around 2-3 minutes according to e-liquid thickness. This will ensure your atomiser does not burn out.
SKU: n/a -
Tanks
Aspire K3 Tank
The K3 tank is a 510 fitted tank, suitable for 510 mods/batteries. The K3 tank is a bottom-filling tank, and has a removable drip tip mouthpiece, making cleaning and maintenance of the tank easier.
Aspire K2 Tank works best with:
- Aspire Nautilus BVC 1.8ohm coil
Important:
When using the tank for the first time, make sure to let the e-liquid sit in the tank until the cotton is fully saturated before firing your device. This should take around 2-3 minutes according to e-liquid thickness. This will ensure your atomiser does not burn out.
SKU: n/a -
Coils, coils and pods
Aspire BVC Replacement Coil
Available Coil Resistance:
- 1.6ohm
- 1.8ohm
- 2.1ohm
Compatible with:
- K1, K2, ET-S, CE5 and CE5-S tanks.
Important: When using the coil for the first time, make sure to let the e-liquid sit in the tank until the cotton is fully saturated before firing your device. This should take around 2-3 minutes according to e-liquid thickness. This will ensure your atomiser does not burn out.
SKU: n/a -
Accessories, Pockex
Aspire PockeX Replacement Glass
Aspire PockeX Replacement Glass features a glass tube covered with a metal sleeve for protection. The Glass tube is easily replaceable and takes only a few simple steps.
PockeX Glass Replacement Instructions:
- Unscrew the top-cap with coil.
- Ensure tank is empty.
- Pull the glass tube off (no twisting required!)
- Ensure no glass remains on the device.
- Gently push replacement glass onto the device.
SKU: n/a -
Coils, coils and pods, Pockex
Aspire PockeX Replacement Coil
Aspire PockeX:Â
The 0.6ohm 316L stainless steel coil is good for both flavour and vapour production, while the 1.2ohm Kanthal coil is a perfect choice if you prefer high nicotine e-liquid.
Resistance Options:
- 0.6Ω (coil pre-installed in PockeX device)
- 1.2Ω
Compatible with:
- Aspire PockeX
SKU: n/a -
Coils, coils and pods
Aspire Atlantis Evo Replacement Coil
Aspire Atlantis Evo Replacement Coil
Resistance Options:- 0.4Ω
- 0.5Ω
Important:
When using the atomiser for the first time, make sure to let the e-liquid sit in the tank until the cotton is fully saturated before firing your device. This should take around 2-3 minutes according to e-liquid thickness. This will ensure your atomiser does not burn out.
SKU: n/a -
Mods, Sub Omh and Mods, Vape Kits
Aspire BP80 Kit
The Aspire BP80 pod vape kit is an innovative device that is ideal for both new and experienced vapers. Featuring a discreet and sleek design the BP80 vape kit is powered by a built-in 2500 mAh battery, which is enough to keep you vaping all day. With an adjustable wattage of up to 80W, you can easily cater your vape to suit your personal preferences.
The BP80 pod kit is equipped with an all-new smart chipset and a host of output modes including Smart Auto mode and Manual RBA mode. This kit is perfect for both MTL (mouth to lung) and sub-ohm vapers, depending on which coil is installed. The refillable BP80 pods have a 2ml e-liquid capacity and are compatible with the BP Coil Range. The pods are easy to install thanks to the BP80’s brilliant magnetic attachment feature.
The BP80 offers not only style but also a substance with a durable design and a range of safety features. A 0.96 inch TFT colour screen clearly displays output modes and vaping data and is easily navigated using the vape kit’s buttons. Feel free to customise your display screen, as Aspire offers 5 different screen colour options. Whether you’re new to vaping or are a seasoned pro, the Aspire BP80 is the kit for you.
Contents
1 x Aspire BP80 Pod Device
1 x Aspire BP80 2ml Refillable Pod
2 x Aspire BP Series Coil Heads (0,17Ω Mesh & 0.3Ω)
1 x USB Type-C Charging Cable
1 x User Manual
1 x Warranty Card
Features
2500mAh Battery Capacity
2ml Pod Size
80W Max Output (Variable Wattage)
All-new Smart Chipset
Adjustable Airflow
SKU: n/a -
Coils, coils and pods
Aspire Cleito 120 Pro Coil
Aspire Cleito 120 Pro Replacement Coil
Resistance Options:- 0.15Ω (Mesh)
Important:
When using the atomiser for the first time, make sure to let the e-liquid sit in the tank until the cotton is fully saturated before firing your device. This should take around 2-3 minutes according to e-liquid thickness. This will ensure your atomiser does not burn out.
SKU: n/a -
Coils, coils and pods
Aspire Cleito Pro Replacement Coil
Aspire Cleito Pro Replacement Coil
Resistance Options:- 0.15Ω (Mesh)
- 0.5Ω
Important:
When using the atomiser for the first time, make sure to let the e-liquid sit in the tank until the cotton is fully saturated before firing your device. This should take around 2-3 minutes according to e-liquid thickness. This will ensure your atomiser does not burn out.
SKU: n/a -
Starter Kits, Uncategorized
Aspire Flexus Blok Pod Kit
The sleek, powerful Aspire Flexus Blok Pod Kit, at the cutting edge of both design and functionality, will revolutionize palm-shaped vaping. You can choose from 6 eye-catching colors that are offered.
The Flexus Blok, with its 1200mAh battery, will give any user a delightful vaping experience that will last all day. It is fully compatible with the whole line of Aspire Flexus coils. The device has been built with such practical features in mind, including a dual activation mode that lets you pick between auto draw and button triggered to choose. Precision and flawless transitions between MTL and RDTL vaping styles are further ensured by the adjustable airflow, depending on your preference.
Contents
1 x Aspire Flexus Blok Device
1 x Aspire Flexus Blok Pod
2 x Aspire AF Mesh Coils (0.6Ω & 1.0Ω)
1 x USB Type-C Charging Cable
Features
Beginner Friendly Kit
2ml Flexus Blok Pod
1200mAh Battery Capacity
Size: 88.5 x 41.6 x 17.5 mm
Auto Draw Activation
Button Triggered Draw Activation
Side Filling
Adjustable Top Airflow
3 Level Power Adjustment
Aspire ASP Chipset For Safety Protection (Up to 6 Features)
Charging: Type-C, 1A Coils: 0.6Ω Mesh Coil (15-18W), 1.0Ω Mesh Coil (12-15W)
SKU: n/a -
Pod System, Starter Kits
Aspire Gotex X Mod
The Gotek X is a perfect combination of the modern innovations and advancements in vape hardware. Integrating a perfectly crafted chassis within a compact pod-sized structure for outstanding portability as well as noteworthy design features.
Contents:
1 x Gotek X Device
1 x Gotek Pod 0.8Ω/2ml
1 x Type-C Charging Cable
1 x User Manual
Features
Built-in 650Â mAh
Refillable Pod
Adjustable Bottom Airflow
Easy Side Fill
SKU: n/a -
Accessories
Aspire Nautilus X Replacement Glass
The Nautilus X Tank comes in three stylish colours: Stainless Steel, Gold, and Black. We also stock Nautilus X 4ml Adaptor Kit, so you can hold more e-liquid in your tank.
The Nautilus X features adjustable top-airflow, which makes sure your tank doesn’t leak over time. This tank is also a top-fill tank, reducing mess and hassle while refilling!
Aspire Nautilus X Replacement Glass
Size:- TPD Standard 2ml
Aspire Nautilus X Replacement Coil
Resistance:- 1.5Ω
- 1.8Ω
Important: When using the atomiser for the first time, make sure to let the e-liquid sit in the tank until the cotton is fully saturated before firing your device. This should take around 2-3 minutes according to e-liquid thickness. This will ensure your atomiser does not burn out.
SKU: n/a -
Accessories, Pockex, Tanks
Aspire Pockex Top Cap Replacement
We have stocked the bestselling PockeX kit from its first launch, including all the replaceable parts available!
Aspire PockeX Top Cap Replacement holds the PockeX coil, and is the perfect spare part available if your device takes a fall!
SKU: n/a -
Coils, coils and pods
Aspire Tigon Replacement Coil
Aspire Tigon Replacement Coil Resistance:
- 0.4Ω (23-28W)
- 0.7Ω Mesh (20-25W)
- 1.2Ω (10-12W)
You can use all coil resistances for nicotine salt e-liquids.
To replace the coil on the Aspire Tigon tank: unscrew the base hardware. Then, pull out the old coil and replace it by pushing in a new one.
SKU: n/a -
Accessories
Aspire Tigon Replacement Glass
Replacement Glass Sizes:
- TPD Standard 2ml
- Bubble 3.5ml
Important: When using the atomiser for the first time, make sure to let the e-liquid sit in the tank until the cotton is fully saturated before firing your device. This should take around 2-3 minutes according to e-liquid thickness. This will ensure your atomiser does not burn out.
SKU: n/a
